Building Enclosures for non builder types

[peterjohnson64]

Another topic of high interest lately has been construction of enclosures. Whilst I acknowledge that I am definitely the worst builder in this forum I wanted to show what a laymen can do very easily.

It turns out that one of my clients sells laminate to kitchen makers down in Griffith. I got them to make up all the bits of HMR melamine that I need to make an enclosure. My wife wanted it in Cherry colour because it would match the other furniture in the room that it is going in. Anyway, all the wood cost me $150 and all I did was screw it together.

They say that they could make a kit for a 4x2x2 with pre-drilled holes, glass and runners, flat packed in White HMR melamine for $135. But if you have a friend who makes kitchens you can do better than that.

Hopefully Steve or Brett will also post picks of the black ones that cost $180.

[Fuscus]

I like that.
Actually it has not occured to me before to use melamine other that white ( it's amazing what I can miss ).
Thanks

[Kersten]

Peter, do you know if it's possible to get it in a mahogany colour?

[peterjohnson64]

Yes Kirsten, he had heaps of colours. But the cost goes up dramatically. The cherry was more than double the white. The black was probably double the white. I also asked about two colour (cherry on the outside & black on the inside) but the only way to do that is to laminate over the top of one edge doubling the cost again.

[Kersten]

Damn Still....it bears thinking about.

[Valley Reptile Supplies]

what u puttin in there pete

[peterjohnson64]

Nothing yet mate. Gotta wait for my hatchies to grow up. I just had to do this while I was in Griffith. Ya got any ideas? they'd probably take womas

[dee4]

The black is more like 3 times the amount of the white.
Great looking unit there Pete.

[peterjohnson64]

Thats interesting Dee, we made a 6x2x2 bank out of black for $180 so that would make it very cheap to make white ones. Hopefully the guys will post the photos. Of course, a large cost is the cutting and edging of the little bits. It's a lot cheaper not to have the lips at the top and/or bottom. We also made another mistake of making the internal dimensions 600 x 600 instead of the outside dimensions. We would have saved a bit there too.

[newtosnakes]

Pete,
Where are the vents mate??
Very nice though and double congrats for doing it all by yourself.

[hugsta]

Also, don't confuse melamine with timber laminates as they can be very expensive, depending on the type of timber used. Looks pretty good Pete.

[peterjohnson64]

The vents are with the glass Mel. I am in no rush as I dont ahve anythng to put in there yet. the vents will be decided upon when I decide on occupants. And yeah Daz, he said laminate was very dear.

[AntaresiaLady]

Not bad Peter- they'll make a rep a nice home!

Might take the pic to our local kitchen place and see if they'll help me out

[Valley Reptile Supplies]

pete bunnings had some nice wooden vents when i was ni there the other day looked quite good

[dee4]

Sorry Pete, I actually meant an 8x4 sheet of black compared to an 8x4 sheet of white. I get it wholesale and it works out about that down here.