Forums Rules Register
Go Back   Aussie Pythons and Snakes > The Zoo > Herp Help
     
Recent Herp Discussion
albino olives $110,000
by zoocam
Last post by bump73
Today 08:07 AM
Maccie eating tail.
by No-two
Last post by LullabyLizard
Today 08:01 AM
Dawin python owners and...
Last post by Earthling
Today 07:35 AM
Closed Thread
 
LinkBack Thread Tools
  #1  
Old 14-Feb-03, 09:10 PM
sobrien's Avatar
Regular Member
Join Date: Feb-03
Location: Melbourne
Age: 18
Posts: 631
Enclosures

Hey guys,
I was thinking of putting a branch in the middle of the cage, half way up, so it looks like it's suspened in mid air but is actually attached at the sides of the enclosure (silalar to the one in Barneys' album). Does any one know how I could attach it and still be able to take it down and clean it?
Cheers
Simon :idea: :idea:
 
  #2  
Old 14-Feb-03, 10:42 PM
stretch's Avatar
Regular Member
Join Date: Jan-03
Location: Boorowa, NSW
Age: 36
Posts: 219
Attach two bits of wood above and below where one end of the branch will be, then the same on the other side. This secures it fairly well and you can slide it in and out to clean it.

IF you wanted it to appear as though it is not touching the sides, then you can use wire looped up through the top of the enclosure and then around the branch and back up to the top of the enclosure. Do it at both ends.

Or ask the guy whose enclosure you saw! hehehe

Good luck
 
  #3  
Old 14-Feb-03, 11:27 PM
Seller
Join Date: Jan-03
Location: Sydney
Posts: 995
That's pretty good Stretch!

I have a suspended branch in my enclosure, but I used a flange at each end (used at end of rods in wardrobes).

The only problem is if you want to clean the branch, you have to unscrew one flange to get it out.

If the stick is thin, there is a curtain rod fitting, or for shower curtain rods.
They just turn to release the stick.

Cheers
 
  #4  
Old 14-Feb-03, 11:45 PM
africancichlidau's Avatar
Regular Member
Join Date: Jan-03
Location: Melbourne O>I>G>L Souly!
Posts: 9,415
You could always use what I use for my high hide boxes, I shall elaborate shall I? OK! Screw an angle bracket to each side of the enclosure at the location you want the branch ends to be, Through the spare end of the brackets fix a 4.5mm, (3/16"), machine screw and secure with a nut, (not me, a nut as in nut and bolt), drill corresponding holes in the branch ends and place these holes over the exposed threads of the machine screws and secure the branch with a couple of wing nuts. Make the bolts short enough so that no exposed threads are protruding when the wing nuts are fitted or alternatively protect the thread ends, (like I did). When it comes time for cleaning take off two wing nuts and remove the branch. It works really well with my hides and I don't see any reason it wouldn't work with any other sort of decor that needs to be fixed above floor level.
 
  #5  
Old 15-Feb-03, 09:07 PM
sobrien's Avatar
Regular Member
Join Date: Feb-03
Location: Melbourne
Age: 18
Posts: 631
Thanks for your help guys,
I think i'll have to give that a try, africancichlidau, wow what a cool name.
Simon
 
Closed Thread

Bookmarks

Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
My Enclosures So Far MAVTOR General Herps 38 11-Nov-07 01:47 PM
WTB Enclosures koubee Wanted to Buy 5 14-Jul-07 10:45 AM
new enclosures bredli General Herps 10 02-Dec-05 10:25 PM
Enclosures KrimenuL General Herps 9 29-Apr-04 09:17 AM


All times are GMT +10. The time now is 08:18 AM.