Which one

Aussie Pythons & Snakes Forum

Help Support Aussie Pythons & Snakes Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.

joelysmoley

Well-Known Member
Joined
Dec 6, 2012
Messages
406
Reaction score
0
Location
SE QLD
Hi, just built a nice melamine enclosure, I would like to finish the edges off by filling the gaps, what should I use?
it needs to be non - toxic and white so it doesn't harm the reptile and so it blends in with the melamine.

Here's some pictures to further explain
baneja9y.jpg

yqa4upa4.jpg
 
The best product for that purpose, on white melamine, is Selley's wet area silicone, in white. It is waterproof, adheres well to melamine, neutral cure, so has little odour - your critters can go in the next day. It does not discolour over time. The gap fillers suggested above are water based acrylic pastes which are not waterproof, and will discolour very easily (they are generally applied to joints which are not exposed to moisture and are to be painted. Not very suitable in the long-term.

Jamie
 
Status
Not open for further replies.
Back
Top