Recommend a place to get melamine cut Brisbane North / North lakes

Aussie Pythons & Snakes Forum

Help Support Aussie Pythons & Snakes Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.

marcus0002

New Member
Joined
Apr 19, 2017
Messages
8
Reaction score
1
Hi.
Looking at getting some more enclosures built.
Built the last one cutting with my circular saw at home but it was too rough for my liking.
I have seen elsewhere here to avoid Bunnings and go to a cabinet maker.
Can anyone recommend one near North lakes?
Cheers
 
Hi.
Looking at getting some more enclosures built.
Built the last one cutting with my circular saw at home but it was too rough for my liking.
I have seen elsewhere here to avoid Bunnings and go to a cabinet maker.
Can anyone recommend one near North lakes?
Cheers

I found putting masking tape on the area you are cutting prevents the jagged rough edges.
 
Last edited:
Hi, I do renovations for a living and there's a few tricks to cut melamine perfect every time with even the most basic saws.
Either get a fine tooth blade ($20) or do the tape thing, clamp a straight edge on to the job and use that as a guide to run the saw along for perfect straight lines every time. Should be 30-36mm from the blade to the saw edge, measure the distance from the blade to edge of the saw.
1b67006968265af358079f69337aeef4.jpg


Sent from my 5044T using Tapatalk
 
try Bunnings' trade desk, buy the sheet and tell how you want it cut prior to collection/delivery.
 
Status
Not open for further replies.

Latest posts

Back
Top