IBC lizard pit

Aussie Pythons & Snakes Forum

Help Support Aussie Pythons & Snakes Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.

RoryBreaker

Well-Known Member
Joined
Jul 20, 2010
Messages
583
Reaction score
247
Location
SE QLD
Heres a build thread on my first attempt at converting an IBC (Intermediate Baulk Container) to a pit for Cunningham's Skinks.

I have been meaning to get around to converting one of these for awhile.

Second hand they can found on gumtree, produce stores or at dealers. I got mine for $80 and it was previously used for shampoo chemicals. A decent scrub out and it will be fine as a pit.

First job was to grab the angle grinder with a cutting disk to cut the top third off. The top I'll end up using for native fish.

My ibc was ribbed, so I fastened the plastic sides to the frame with tek screws.

To be continued.....
b5e4150cfc4510248aa991ca9a8023d4.jpg
eb7290c668d8715ffee63b9aca8e6ff0.jpg
91eedc54ff9cabf32f7e4fd30d1aa216.jpg
e181b638c7d48ecde0c66dff403d8a91.jpg


Sent from my SM-G930F using Tapatalk

I forgot to take pictures of a couple of steps.

Anyway, I like my pits to have lids (I don't trust my local wildlife not to poach my stuff). With that in mind, I secured a frame made from aluminium tubing with qublok corners to the frame of the IBC. I found the tubing left too many gaps so I doubled up with another layer of tubing around the outside. Silconed any small gaps underneath the overhang inside. Then another frame for the lid was made to fit inside. Mouse wire was affixed to the lid frame with some tek screws, and the wire got painted black straight from a can. I got lucky with my lid dimensions as the wire required comes in 900mm wide or 1200mm, the 900mm fit perfectly without any trimming.

Installed some handles.

I also had a few sheets of polycarbonate lying around and decided to mount them around the cage. I'm hoping to limit the UV degradation to the plastic.

Next is to drill the base for some drainage and to install some slide locks on the lid.

To be continued....
c09f154218c5ad2d80956cfc4c6d60cf.jpg
4095efa40f3dcea386a776117b70e07f.jpg
ba168a0a08723ce297b12c60e114656f.jpg


Sent from my SM-G930F using Tapatalk
 
Last edited by a moderator:
Thanks for posting this :) I'm enjoying seeing the progression :) Looking forward to seeing the end result.
 
I built one for my turtles 5 years ago and they are still in there today with good healthy water chemistry levels
 
I drilled a heap of holes through the base and added mixed river gravel.

A trip to the local landscape supplies for some besser brick cage furniture. Bargain at $2.60 each. My other Egernias love these bricks. I plan to bury these under more rocks and logs.

To be continued..

00132dcd9f321c96c1a44813f4feb6a9.jpg
c5adafe15fb4fb2045f0830fdd724746.jpg
951f79b93d4b6873a1beb6821510212a.jpg
fa22ba69454b9d9e3d8b0c1c77f9788a.jpg
1669366b5841cc0310d1cf0c161cc491.jpg


Sent from my SM-G930F using Tapatalk
 
Besser blocks are ideal for creating habitat hides / refuges for all sorts of wild skinks, I have a couple dozen along the bottom of the boundary fences in my back yard, some with plastic selfwatering pots and troughs on top of them, the skinks love them.
 
This looks bloody awesome - great stuff, mate.

I need to do this for my cunninghams ASAP!
 
Last edited:
Quite the family in here, mum & dad, some yearlings left over from last season and this season's kids.

The trick with outdoor pits is to give the skink different thermal options.

All up I guess its cost me $200.
22ca637788ab057fd51c6fcbe323015c.jpg
3c5370626570372a192077cd0a979773.jpg
5557a74a73acca49f2e2cb6a5f30100c.jpg
be0deaa72ac744aeab90450799deff4c.jpg
4f6ed20bb05e73348cced27190a7b819.jpg


Sent from my SM-G930F using Tapatalk
 
Love the set up mate bloody awesome. Looks like the skinks are lovin it too. Good on ya
 
Status
Not open for further replies.

Latest posts

Back
Top