How much ventilation for 4 ft?

Aussie Pythons & Snakes Forum

Help Support Aussie Pythons & Snakes Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.

Melmy

Not so new Member
Joined
May 21, 2019
Messages
79
Reaction score
57
Location
VIC
For a woma - enclosure is wood with glass front. 120x 60x 60. Currently only has two 40mm round vents and one 165 x 85mm rectangular vent - should I add another rectangular? Or more than one?


Sent from my iPhone using Tapatalk
 
Anyone?


Sent from my iPhone using Tapatalk
 
2 holes should be fine if you keep them up to the top

you dont want too much ventilation
 
It's difficult to give a short answer, there are many variables, but almost certainly that amount is plenty. Generally you'd actually get away with far less in an enclosure that size. Definitely sounds fine.
 
Thank you! I should have added a picture - the round ones are down the bottom. But therectangular one is actually a bit bigger than i put in my OP.
I’m replacing the round vents and fixing the back wall so there’s no tape- bubba snake is still tiny and in a separate tank IMG_6832.jpg

IMG_6852.jpg

IMG_6852.jpg
 
Status
Not open for further replies.

Latest posts

Back
Top