I've bought an Exo Terra large tall enclosure to modify into a display for a green tree python. I've replaced the mesh with a piece of acrylic with a heat panel attached. Some people are iffy on whether this is a suitable enclosure, if it will stay warm enough (it's in a heated room, which is about 25 degrees minimum all the time), if it keeps humidity and if it would get enough ventilation just through the doors. Could someone point me in the right direction with this? Thanks.
Enclosure?
- Thread starter msxcbvc
- Start date
-
- Tags
- morelia viridis
Help Support Aussie Pythons & Snakes Forum:
- Status
pinefamily
Very Well-Known Member
If you are concerned about ventilation, put the mesh top back on, and cover part of it with silver heat tape (available from Bunnings). You will need to find another way to mount your heat panel of course.
The only way to know if it is warm enough is to set it up, and run it without the snake in it.
The only way to know if it is warm enough is to set it up, and run it without the snake in it.
- Status
