Dividing an existing Melamine enclosure

[A's Reptile Room]

Afternoon Brains Trust,
I have an existing melamine enclosure that I want to move 2 x Childrens Pythons into but will obviously need to divide it. I was thinking of using a sheet of 25mm Bastion foam from Bunnings (that will be incorporated into the fake background on both sides (So it will be coated with tile pointing or similar). Do you think this will work? I would need to bring it as close to the front glass as possible so there is minimal gap but the door can still slide open.
Any other good ideas out there?
Thank You

 

[dragonlover1]

there is no problem there, just allow time for the pointing and paint to air out first, minimum 1 week, more is better. you could also use a sheet of plywood and do the pointing or grout but similar time frame

 

[A's Reptile Room]

there is no problem there, just allow time for the pointing and paint to air out first, minimum 1 week, more is better. you could also use a sheet of plywood and do the pointing or grout but similar time frame

Thanks for the reply mate, I will go down that path