Rogue5861
Very Well-Known Member
I brought a box of latex gloves from coles before i started mine, use them for cleaning silicone up aswell.
First coat was poured on a spread with a brush, but all other layers were scooped onto the background and worked in using my handa hand. I got some fine lines using gloves but also got the rough texture, the sealer will block up holes in the surface of the wall but will still allow the render to have a slightly pitted surface for my monitors to dig into.
Render is great because i managed to put 3 coats on in a day, will never go back to grout.
If you want a smooth texture i would go with a cement mix, make great water features.
Rick
First coat was poured on a spread with a brush, but all other layers were scooped onto the background and worked in using my handa hand. I got some fine lines using gloves but also got the rough texture, the sealer will block up holes in the surface of the wall but will still allow the render to have a slightly pitted surface for my monitors to dig into.
Render is great because i managed to put 3 coats on in a day, will never go back to grout.
If you want a smooth texture i would go with a cement mix, make great water features.
Rick