I wouldn't cut it at bunning thier as rough as guts a lot of cabinet makers would cut the sheets better and cleaner for a small fee, reasons being is that a good cabinet maker will have an accurate table saw with fairly sharp blade that will give a clean cut.Dont cut the wood yourselves, firstly it comes in sheets of 1.2 x 600 hence the size i made it. secondly big sheets can be cut for like a buck at bunnings all you do is screw it and seal it!
I cut the lead off a power saw when I started my chippie apprenticeshipand don't cut the extension lead under the wood your cutting like our trainee did last week.
even if you are not steady with a circular saw by setting up a straight edge you can run the saw base up against the straight edge ( as long as you fix the straight edge with either clamps or screw to the sheet) you can't go wrong if you want more info I'll try to set up a few pics on Saturday so you can see what I meanFor those of us not super handy with a circular saw get one with a laser light ones,helps you cut a perfect line too easy!!!
and get a BAD cut every cut they have done has gone on an angle so now i do it myselfGet Bunnings to do it....for a few bucks it saves a hell of a lot of trouble.
Enter your email address to join: