New Enclosures - Brisbane

Designed by reptile enthusiasts for reptile enthusiasts!!!

All our standard enclosures include the following:
- constructed from 16mm HMR (high moisture resistant) melamine
- 4mm sliding glass front with polished edges all round
- 2mm pvc edging (more durable than the 1mm iron on edging and less prone to chipping)
- 2 plastic vents for good ventilation
- ceiling mounted bayonet fitting certified and tagged by a qualified electrician
- fully stackable with cages of similar size
- all boards professionally cut to size
- top and bottom rail (hides fluorescent fittings and reduces chances of fouling in glass track)
- all internal corners sealed with silicone
- base raised 16mm to reduce heat transfer from enclosure below when stacked

These enclosures are rigid, built to last and easy to clean.

Standard sizes and cost:

BIG - 1200 x 600 x 600mm - $330

LARGE - 900 x 600 x 600mm - $295

MEDIUM - 900 x 600 x 450mm high - $285

SMALL - 600 x 450 x 450mm - $235

For further information feel free to drop me an email at [email protected] or send me a pm.

Thank you for taking the time to read this.

Regards,
Rob

Good looking enclosures, does he have a website and if so what is it?

Thanks

i don't have a site at the moment, but will do in a few months time. feel free to drop me an email and I'll send some pics of other stuff we've done if you like.

have had a great response, still able to do a few more though at the moment.

keep them coming... ;o)

rob

Hey Rob, long time no speak!
How is your little atherton going? Have you figured out whether its a brother or sister of Razor?

I will prob want to buy a small enclosure in about 2 months time, if you will have any around this time?
Any possibility of getting one in black at all?

Speak to you soon,
Mel

do you make stained enclosures if so how much for some thing like this cheers

jkrakka, at the moment have only had time to make the standard sizes as above and are selling well.

Mel, we will definitely have some whenever you're ready. Just give me a week or so notice. Yes one of my athertons is from the same clutch as Razor, awesome little jungles hey.

I have had a lot of interest from keepers on the Gold Coast. If anyone is interested in getting some enclosures from me I would be willing to bring a few down in my truck and a trailor if you want to split delivery costs.

Send me an email or pm if interested and I'll work out a delivery cost.

Thanks,
Rob

Hey
I was just wondering how much for an enclosure that is 1800mm high, plus 500mm up off the ground, 1800mm wide, and 900mm deep.

Thanks

Chiefmillar said:

Hey
I was just wondering how much for an enclosure that is 1800mm high, plus 500mm up off the ground, 1800mm wide, and 900mm deep.

Thanks

Click to expand...

Chiefmillar,

See comment above. I'm not doing the custom stuff at the moment, I'm not a business, I just make a few of the standard sizes to put money back into feeding & housing my collection.

Feel free to contact me should you want any of them.

Cheers,

Rob

1200 x 600 x 600 - $310 (collect Upper Kedron)

Was meant to be collected by shada35 (phil) on friday night, but haven't heard from him at all. First come first serve, I won't be running after people.