cools2036
Active Member
- Joined
- Jan 9, 2012
- Messages
- 299
- Reaction score
- 0
Hi guys just want to get your thoughts on this setup I'm currently trying to design.
It's a remote dimmable LED system.
It uses an LED strip type lighting in conjunction with a push button dimmer with 8ch remote function.
So for example if you have 4 enclosures each running a daylight (cool white) and moonlighting (blue) you would have a 2 gang switch on each enclosure and the one remote can dim/override each light.
See the picture below from one of my suppliers of a 2 gang switch system and remote.
This image is from the supplier directly and is the property of verilight. It's used as an example only.
I'm still working on a low volt circuit and strip bracketing to keep it as flush mounted as possible. And as this produces little to no heat it's a great looking way to replace nasty bulb type fittings.
If they test good and get the ok I will be offering them as an adding extra to enclosure builds.
And hopefully as a readily available kit for DIY'rs
It's a remote dimmable LED system.
It uses an LED strip type lighting in conjunction with a push button dimmer with 8ch remote function.
So for example if you have 4 enclosures each running a daylight (cool white) and moonlighting (blue) you would have a 2 gang switch on each enclosure and the one remote can dim/override each light.
See the picture below from one of my suppliers of a 2 gang switch system and remote.
This image is from the supplier directly and is the property of verilight. It's used as an example only.
I'm still working on a low volt circuit and strip bracketing to keep it as flush mounted as possible. And as this produces little to no heat it's a great looking way to replace nasty bulb type fittings.
If they test good and get the ok I will be offering them as an adding extra to enclosure builds.
And hopefully as a readily available kit for DIY'rs