jakehendo
Not so new Member
Gday guys and girls
im making a triple stack enclosure and was just after some suggestions and help if needed and what you guys think.
the frame will be made out of 25mm box tubing each enclosure will be 1200mmx600mmx600mm,
im going to be using 16mm melamine for the flooring and then 9mm structural plywood for the roof. the walls and back will be made out of structural plywood about 12mm thick also, each enclosure will have a 2ft uvb fluro in them and two 75w halogen heat lights on a thermostat i may also put an extra ceramic fitting for a MVB by its self not on the thermostat so i can choose weather to run just the MVB and a regular fluro or the heat lights and a UVB fluro. the dragons substrate will be on crushed walnut sand or just bunnings washed play sand of around 50mm thick it will have sliding glass doors and ventilation at the back down both ends.
this is what im thinking so far for the frame, let me know what you guys think
im making a triple stack enclosure and was just after some suggestions and help if needed and what you guys think.
the frame will be made out of 25mm box tubing each enclosure will be 1200mmx600mmx600mm,
im going to be using 16mm melamine for the flooring and then 9mm structural plywood for the roof. the walls and back will be made out of structural plywood about 12mm thick also, each enclosure will have a 2ft uvb fluro in them and two 75w halogen heat lights on a thermostat i may also put an extra ceramic fitting for a MVB by its self not on the thermostat so i can choose weather to run just the MVB and a regular fluro or the heat lights and a UVB fluro. the dragons substrate will be on crushed walnut sand or just bunnings washed play sand of around 50mm thick it will have sliding glass doors and ventilation at the back down both ends.
this is what im thinking so far for the frame, let me know what you guys think