Enclosure build for a friend

Aussie Pythons & Snakes Forum

Help Support Aussie Pythons & Snakes Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.

OPPPO

New Member
Joined
Jul 27, 2011
Messages
6
Reaction score
0
Hi there,
I built this enclosure for a friend over a couple of weekends.

Its 1200mm long X 600mm tall X 500mm deep white melamine.

There is a heat cord in the floor cut into the wood with a glass panel over the top flush with the floor.

On each side there is a vent (on the inside and outside of each side to cover the hole).

The lid has about 200 holes cut in it for air flow!!! It took a long time to drill them all.

THe front panel is 3mm glass that runs in a plastic bead fitted in a groove in the floor and in a groove in the lid to hold the glass in.

The hides are both terracotta. One is the bottom of a garden pot and the other is an old pipe I found.

Out of curiousity would anyone be interested in buying one similar to this? How much do you think something like this would be worth (even if you wouldn't buy one)?

Considering making some as a hobby and for some extra pocket money:D

ImageShack� - Online Photo and Video Hosting

P
icture here^^^^
 
Status
Not open for further replies.
Back
Top