Ok lets finish the thread off lol
@
Porkbones @
dragondragon .......If u look at both black and white routered enclosure floors there is an extra slot in the middle that is for the probe to be inserted from the rear wall via a hole that u will drill, I then push in and just tape in place (c pic)
Regarding 2 enclosure and 1 cord , I have done this before but the bottom tile that was above the cold tiled floor always was 2 deg lower so had to put a thin piece of polystyrene under (so u have to do some testing)....in the perfect world 2xcords and stats work best......THO if u c in the pics of the power board set ups on both black and white enclosures I am using 1 x stat for the 2 x cords in the black one and 4 x cords in my 4 x bank stimi enclosures (which r in anuva thread)...all testing is done and I get constant tems for all tiles.
The answer but u will have to test regarding setting stats temps is that I have found I have to set 2 deg higher to obtain the required temp ....eg stat is 36 giving me a 34 deg max then it drops to 32 before reheating but it will be constant temp if u use a digital pulse stat...OK worn out now so here r some pics...any questions plz ask im here to help
4 x Stimi Bank (I love the idea I can switch any enclosures of at any time)
Resent reno...(Was sweating it out regarding how much cord I had left lol
)
As u can c I just push probe in and tape up
And all clean and ready to go (just waiting on the extremely poisonous silicone to dry out before snakes go in
)
@
dragondragon ..cant help u with the silicone answer as there was a huge debate on here last week and if u wana be fully safe just use aquarium silicone (I do use bathroom sealant due to the colour ) but that's my choice and been using it for many a yr here and in the UK with no problems...all to there own...check and c if u can find the thread and have a read yourself and make your own mind up......OKIDOKI Bye From ME.......Pete